Before working on any plumbing project, be sure to turn off the water. The water supply line to your toilet is connected to the wall or floor; simply turn the valve to stem the flow of water (Image 1). Flush your toilet and keep the handle down to empty the toilet of water. You’...
Before you remove the old hose, you need toempty the toilet tank. First, shut off the water valve by turning the handle clockwise as far as it will go, but that's not all you should do. Any water in the tank will pour onto the floor, so flush the tank, then hold down the handl...
Then, locate your main water shut-off and turn the plumbing system completely off. You can do this on the street or where the water main enters your home, which is usually near the front wall of your home that faces the street. Read More: How to Turn Off Main Water Valve for ...
How to Replace the Chain in a Toilet 10 Easy DIY Fixes for Common Toilet Problems As the tank water lowers and the toilet bowl fills, the flapper drops back into position, sealing the hole at the bottom of the tank. When it is working properly, the flapper won't allow any water seepag...
Step 4– If at any time the toilet keeps running water and you see water on the floor immediately turn off water and look inside the tank to see if the water is coming from the lid or tank lever area. Replace fill valve and replace flush valve. The flush valve is set to the wrong...
1. Use your toilet’s shutoff valve to turn off the water, then flush your toilet until it’s empty. 2. Attach the T-valve to the water supply line. You’ll need to unscrew the toilet’s supply hose from the bottom of the toilet and replace it with the T-valve. ...
A toilet that flushes on its own, also known as phantom or ghost flushing, is a common problem. Addressing this problem may require replacing the flapper, flush valve, or flush valve gasket. In this article, I show you how.
If lifting the float arm DOES NOT shut off the water completely, then the fill valve has failed. Go to Step 16 to replace fill valve. To replace flapper, buy a new one from a hardware store. Turn off water to toilet tank with the valve on the supply line. ...
Watch this video on how to remove and replace cap assembly of the fill valve: 3. WATER RESONANCE: This noise is alerting you that your shut off valve at the wall has an obstruction in the flow path of the water. Here are some solutions: ...