the working parts inside are fairly simple to understand. Remove the tank lid and set it in a safe place. Look for a flap or stopper-style device connected to a chain and sitting near the bottom of the tank — this is the toilet flapper. Flush the toilet and watch as the chain connec...
First, remove your tank’s cover and flush the toilet. Observe how the chain behaves. If it barely raises the flapper, it’s too short. If it’s so long that it threatens to get under the flapper, it’s too long. In either case, the fix is relatively simple. If the chain is too...
In most toilet tanks, the handle lever and the flapper are connected by a chain. By pulling this chain upward, you can lift the flapper and, in that way, flush a toilet that cannot be flushed regularly due to a broken handle. Remove the lid from the toilet tank. Take a look at the...
You can place the toilet tank lid right across the toilet bowl.Don't knock the lid on the floor - they break.Don't waste time moving towels and stuff - we're in a rush to stop the toilet from overflowing. Reach inside the toilet and push down the flapper valve that is letting the...
After the water is turned off, try using a conventional plunger to unclog the toilet. Put the plunger directly into the bowl of the toilet. Be sure the water covers the cup of the plunger; if it doesn't, you may need to manually control the flapper until enough water enters the bowl....
Check refill tube first: If refill tube is inserted or shoved into the overflow pipe, remove it and reattach clipping the tube to the overflow pipe. This will keep the tube from entering the overflow pipe and stop the leak. Clean bottom of the tank and flapper area and replace flapper. ...
If the toilet is clogged, avoid repeated flushing. Remove the tank lid from the toilet and find the round rubber flapper at the center of the bottom of the tank. If the water is rising and threatens to spill over, push the flapper down over the hole to keep water from flowing into the...
How to Fix a Damaged Toilet Flapper Difficulty level:Easy; most homeowners can complete this fix independently. To replace a flapper: Turn off the toilet valve. Empty the tank by holding down the lever. Remove the chain from the old flapper. ...