How to Disassemble a Keyless Drill Chuck: I've had this cordless drill for going on 10 years now. It has been a great drill, but recently has been plagued with a sticky chuck, making it hard to open and close the chuck. A few months ago I purchased a new
Insert a chisel blade into the end of the hammer drill and secure with the drill chuck. How this is done will depend on your hammer drill, either with a key or a keyless chuck. Put on safety equipment, including goggles and gloves. Step 4 Hold the chisel at a shallow angle to the e...
Do not use worn bits as they may drill holes larger than needed to match the different anchoring systems. Make sure the bit is seated properly in the chuck and the chuck is working properly. If drilling in soft or damp material, frequently remove the bit and clean out the flutes to preve...
Removing Threaded-on Drill Chucks Most handheld drills and drivers have threaded-on chucks, although, that's not always the case. But you can be certain that all keyless chucks are threaded-on chucks. Again, it's best to check the owner's manual if there's any doubt. Threaded-on chucks...
Allen Wrench for Keyless Chucks (Easiest Method) Download Article 1 Remove the screw in the center of the chuck. Turn the drill off or unplug it. Loosen the jaws of the chuck by twisting them to the left as far as they’ll open. Look inside the chuck where the drill bit would go...