Don't apply so much water as to create a slurry. To remove smoke stains, mix a half-cup of trisodium phosphate (TSP) in a gallon of hot water, or use a commercial scouring powder that contains bleach. Use the s
Avoid harsh, acidic cleaners if you don't need them—the BIA notes these cleaning solutions "may not be appropriate for pavements containing joint sand stabilizers or polymeric sand-filled joints." If you're not sure what you're trying to remove from the brick's surface, start with the lea...
Pressure washing canremove the natural protective patina of stone and masonry surfaces. It will also remove any coating or sealers. This opens up the pores in the surface, allowing water to seep deep into the stone or masonry. ... The salts are dissolved from the water and deposited on the...
When you have completed laying all the bricks, go to the wall that faces the wind direction. Remove a section of bricks 3 bricks high from the top of that wall. This gap will serve as your vent, allowing the smoke from the fire out and keep the kiln from overheating. 3 Lay the corr...
If you are low on time, hire a cleaning service the day before you show the house to make sure everything is sparkling. Dust the surfaces. Clean the floors and remove any stains. Wipe down the refrigerator, oven, and countertops in the kitchen. Clean out toilets, showers, and baths. ...