Here is what the barrel looks like after rough profiling is done. Now I thread for the barrel extension. The last profiling cuts bring the barrel to it's final diameters. If the muzzle is to be threaded, it is also done now before crowning. The crown is cut using a specially ground c...
Check which barrel and gas system length the handguard is designed for before buying it. Free float handguards can be longer than the gas block, while drop-in ones will need to be the exact length to attach onto your gas block.Free float handguards are more accurate, more expensive, harde...
be sure to clean the gas hole in the barrel (a #50 drill bit should work, but do this by hand). I suggest you remove any carbon from the gas block threads by chasing them with an M1 ordnance tool or a .500″-32 NS-3 tap. ...
While I completely agree that the Constitution was designed such that it could be amended, it was also designed such that an amendment would be incredibly difficult to approve. When it comes to the second amendment though, this right is especially difficult to remove as the power held by those...
Whenever possible, always clean the barrel by inserting the cleaning rod into the breach (back) of the barrel, not the muzzle (front). Depending on how the gas system is designed to operate, you may or may not need to clean the gas tube. Check for cleaning instructions specific to you ...