Start from the driver side front tire, use the TPMS Relearn tool to reset the tpms sensor Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor Repeat the process for the passenger side front tire, passenger side rear tire,...
2. Depending on the detected TPMS code, repair or replace the damaged part/s. Codes may reference a faulty TPMS module, receiver, actuator, tire pressure sensor or circuit 3. Clear trouble codes 4. Relearn sensors after clearing codes
An auto relearn procedure is when a vehicle has the ability to learn single or multiple TPMS sensor IDs without the need of performing the relearn procedure with a TPMS tool. Furthermore, a technician can adjust the inflation pressure, rotate or replace sensors and the TPMS system will reset ...
If a sensor or part is reading bad, be sure to visually inspect the wires coming out of that part, and verify conductivity with a multimeter. If electricity is reaching a certain spot in the wire, but not all the way to the sensor, that wire should be replaced. Conclusion Tracking down...