Laser cutter:A laser cutter cuts using a laser. Actually, it cuts wood, plastic, and leather up to about a 1/4-inch thick. It engraves on a wide range of substances, including metal and slate. I used it to makegift coasters,office signs for my editors, and lots and lots of l...
I found out the model number of the aluminum I bought at my local hardware store and asked ChatGPT for the alloy number, which indicates hardness. Then I asked ChatGPT, based on that alloy number and the 1/4-inch thickness, whether I needed to heat the metal before bending. ChatGPT ...
Put a bit of glue on the outside of the small tab of one of the pieces and glue that tab to the inside of the longer tab of the other, as you can see toward the right of the 3rd photo here. (This photo already shows the piece with the figure 8 viewing window inserted.) Once...
to print books and small matter, you arrange blocks of metal type in a press to spell out words; headlines or posters often use large type cut from wood. a letterpress then pushes paper down onto the blocks, which have been covered with a thin layer of ink. you wind up with inky ...
I found out the model number of the aluminum I bought at my local hardware store and asked ChatGPT for the alloy number, which indicates hardness. Then I asked ChatGPT, based on that alloy number and the 1/4-inch thickness, whether I needed to heat the metal before bendi...