As you may know,initramfsorinitrdstores itself in the/bootdirectory, which is protected with write permission, and it is also not advisable to make any changes to this directory. So, first and foremost, we will create a temporary directory in/tmpwith theinitdirectory. To make a temporary dir...
/bin/sh set -ex export DEBIAN_FRONTEND=noninteractive # Extract the initrd from the Unified Kernel Image. # systemd-boot is installed by mkosi and uses the Unified Kernel Image, # however these images are ultimately going to be used by Mender # which expects grub and separate images UNIFIED...
-- but whatever I try I can't make it see that initrd image from the Debian kernel. > There are larger console fonts, such as Sparc 12x22. Thanks, yes, I was hoping to try them at some point. I don't suppose you know the kernel option to disable the fb device, do you? Then...
Linux_for_Tegra/tools/kernel_flash/l4t_initrd_flash.sh To flash the Jetson's NVMe withinitrd: 1. Put the Jetson device in Recovery Mode. 2. Move into the Linux_for_Tegra directory in the host machine: cd Linux_for_Tegra 3. Run the script with the following arguments: ...
Relative path to initrd in the OS image Do not specify a value for this variable for non-JET profiles. images/pxeboot/initrd.img (Default) Save the variables set. Select the variables set that you just saved from the drop-down menu in the LinuxImage component row of the Plan Parameters...
[*] Initial RAM disk (initrd) support File systems ---> <*> Ext3 journalling file system support <*> Second extended fs support (important note: do not enable /dev file system support) 编译并安装内核: make dep bzImage make modules modules_install cp arch/i386/boot/bzImage /boot/...
initrd($root)/initramfs-x.y.z-aa.el9.x86_64.img$tuned_initrd After the stringquiet, add the parameterrd.break, and then pressCtrl+Xto exit the parameters editor and continue booting. Therd.breakparameter causes the initial RAM disk containing the parts of the Linux kernel required to boot...
initrd /initramfs-2.6.32-358.el6.x86_64.img.bak Alternatively, you can enter edit-mode in grub if you need to choose the old initrd and did not make a separate entry in grub.conf before rebooting. To do so: –If grub is secured with a password, press p and enter the password. ...
Once this is done, you will need to either manually copy the new kernel to /boot, create the initrd file and change the GRUB menu or use the make install option to get things done automatically. So the manual way to get this done is by first copying the kernel image: ...
initrd /boot/initrd.img-3.5.0-17-genric To save changes and boot, press the control key and X. With this command, you are now booting with both read and write access rights into a Linux kernel. Here you can use a bash shell instead of a graphical user interface. In other words, you...