If you are unable to insert the card properly, please check the direction of the card slot and avoid forcing it in. Type 1: For Normal Security Camera 1. Find the SD card slot on the side panel. 2. Holding the card in the correct orientation, carefully insert the SD card into the...
To re-register the camera to another TP-Link account, you have to factory reset the camera to remove it from the original account first. Below are the detailed instructions to factory reset the camera. How to reset my Tapo camera After removing the camera from the original account, please ...
Go back to previous or soemone else. How to Bluetooth AUDI | Mazda | Mercedes | Nissan | Peugeot | Toyota | Volkswagen any questions can be left below in the video comments section or Facebook TP-Link Tapo C200 WiFi Setup Full HD Security camera specs + test How To setup 1080P HD ...
If your device is connected wirelessly to a Wi-Fi network, you can check the received signal strength on the app. Tapo APP -> tap in the left top -> Device Settings -> Device info -> tap Wi-Fi icon to see signal strength (the value of RSSI). Strong: more than -50 dBm Good to...
There are two methods to reset the Tapo camera to its default settings. Method 1: Use the RESET button Type 1: For Security Camera While the camera is powered on, press and hold the Reset button for at least 5 seconds until the LED blinks red. The camera will reset and reboot. ...
If you are unable to insert the card properly, please check the direction of the card slot and avoid forcing it in. Type 1: For Normal Security Camera 1. Find the SD card slot on the side panel. 2. Holding the card in the correct orientation, carefully insert the SD card into the...
Type 4:For battery-powered cameras and doorbells that work with Tapo Hubs For cameras that connect to a hub, the Micro SD card needs to be installed in the hub. You can find the Micro SD card slot on the back of the hub. Hold the card in the correct orientation, carefully insert th...
Method 2: Remove the camera via the Tapo App Option 1: Go to the Home page On the home page, long tap on your camera model card. Then tap theminus iconon the card. The camera will be removed from your TP-Link account and reset to the default settings. ...
Method 2: Remove the camera via the Tapo App Option 1: Go to the Home page On the home page, long tap on your camera model card. Then tap theminus iconon the card. The camera will be removed from your TP-Link account and reset to the default settings. ...