Systems tested to MIL-STD-202G Method 214A, test conditions II-D and above are considered rugged. Dewesoft DAQ systems are extensively tested in our state-of-the-art testing labs for shock and vibration. We install our systems on rocket launch platforms, use them in off-road proving ...
label_ch1andlabel_ch2, and then concatenate the two strings to create the final label,fin_label. We will use theplt.textto create the text label. The first and second parameter(0.2, 3)is the x and y position of the
Permanent Install Motor Monitoring Asset monitoring systems are used to prevent failure in critical devices, such as large pumps, fans, belts, etc., by monitoring physical and electrical parameters to intelligently determine when a machine needs to be maintained. The current signature of a large mot...
If the 3D model isn’t moving the same as your quad, it can mean a few things, maybe your FC is upside down, or it’s installed facing the wrong direction (e.g. arrow on the FC is not pointing forward). Try to rotate the board until it’s right. If you cannot physically rotate...
Analog current loops are used for any purpose where a device needs to be either monitored or controlled remotely over a pair of conductors. Only one current level can be present at any time. “Four to 20 milliamp current loop,” or 4-20 mA, is an analog electrical transmission standard fo...