Make your hinges visible by opening your door. Take out the Phillips head screwdriver for loose screw tightening. It will lift your door high enough so its deadbolt can return to the locked position in the striker plate. Step 2: Secure the setscrew If you can spin the knob but your door...
Adjust the striker plate, which will have two screws mounted in adjustable slots. Loosen the screws, reposition the striker and retighten the screws. Test and readjust to get a perfect close. You want the door closed tight, but you should not have to pull. Replace the handle if the strike...
The DIY experts at HGTV share how to turn a regular hinged door into a sliding barn door for an industrial farmhouse look.
It could be that one of the striker plates is slightly out of position. Alternatively, the lock itself could be out of alignment inside its mounting plate. Regardless of what's causing the trouble, a little fiddling might be necessary. Ideally you want the motorized lock to lock and unlock ...
Align the striker plate with the faceplate and use a 2mm drill bit to create pilot holes. Drill the two screws that were provided with your door handle kit into the top and bottom of the striker plate. Shut the door to be sure the striker plate has been fit properly and that there is...