Setting the Units 1.) Type in UNITS and hit the <enter> key 2.) The Units dialog opens and you will see on the left your Units of measure and on the right your Angular Units. 3.) on the right side set the drop down to Deg/Min/Sec and select OK Now your Units are set Usage ...
of stainless steel would be able to withstand the heat generated by a jet engine. Therefore, I chose 316, because it has a nice balance of a lot of different properties, was available in a lot of different shapes and sizes, and I had worked with it in small amounts in previous ...
I had the chance to chat with Dr. John Walz, the new president of the Milwaukee School of Engineering—and then hear him speak—at last month’s Fluid Power Technical Conference, held on MSOE’s downtown campus. Walz, who has a Ph.D. in chemical engineering, has a lot to say about ...
The failure mode would be bearing failure on the bolted connection. The reason for trying to avoid the full seismic upgrade is that the review process will be much longer and the cost to the owner will exceed the value of the building by a lot. As it is, the owner thought he was ...
The AutoCAD bug has been persistent across the last two Windows versions we've used; 64 bit versions of 7 & 10. We've always used high resolution monitors - 3840x2160 currently, & 2560x1600 for 10 years prior to that. I don't know whether this has any bearing on the described ...