1. Make sure that your SIM card fits your device Use standard Nano-SIM and Nano Memory (NM) cards. Non-standard cards can damage the card tray or card slot or lead to card detection failure. If your SIM card cannot fit into the card tray, contact your carrier for replacement. Do not...
Your iPhone is linked to the cellular network by the SIM card. If the SIM card is damaged or not inserted correctly then the iPhone will be unable to receive a network signal and you may run into a ‘SIM card inserted but no service iPhone’ issue. Therefore, when the iPhone says no ...
Place the new SIM card into the bottom of the tray. Because of the notch, it will fit only one way. Insert the other SIM card into the top tray. Reinsert the SIM tray into your iPhone. How To Set Up eSIM on Your iPhone Setting up an eSIM is different from dual SIM as you don...
However, apple mobile devices use a minimal-size of SIM card, which means iPhones are only compatible with the nano-sized SIM card. If you find that the SIM card size is not right, you can use a SIM cutter to make it fit in the SIM slot. 🧲Unpair Apple Watch If you have a new...
Adding your social networks, email accounts, and more HTC 10 Back panel Card tray nano SIM card Storage card Charging the battery Switching the power on or off Setting up HTC 10 for the first time Fingerprint scanner Updates Installing a software update Installing an applicatio...
Method 3: Reinsert SIM Card Another easy solution you can try is reinserting the SIM card. To reinsert the SIM card, you just need a paper clip or a SIM card ejector, and then press it into the small hole of the SIM tray. Then the SIM tray will be ejected, and you can check ...
make smaller, more fully-featured devices means that many of them can’t fit a SIM card tray. That’s especially true for smaller electronics like smartwatches. Furthermore, the tray area represents a potential ingress point for liquids, hampering the device’s water resistance to some extent...
Step 3. Now place your SIM in the correct positions on the SIM tray, then insert it into your iPhone. Wait for the SIM card to be detected, and you'll see the network displayed on top.As said earlier, while switching the SIM card to a new iPhone, the SIM card should be compatible...
Step 5:Reinsert the tray into your iPhone in the same orientation it was when you removed it. The tray should slide in smoothly; it will only fit in one way, and it won't go in easily unless the SIM card is sitting properly in the tray.Do not force the SIM tray...
Once the SIM card is in place, go ahead and insert the tray back into the phone. Again, put some pressure on it to make sure it’s fully inserted. You’re done! Turn on the phone, and you should be good to go. What is an eSIM?