I played around with /sys/class/net/eth0.1 and /sys/class/net/eth0.2 as well with (at least to my finding) no reliable way to detect that something was physically plugged in and talking on any of the ethernet ports. I figured out a bit crude but seemingly reliable way to de...
BTW, the HW is done and I can’t physically check the Ethernet port status. Another option is when function NetIF_Start() returns an error due to the missing of the cable, what is a correct procedure to re-initialize the Network interface and wait for the cable ...
However, if you really need to know that thecableis in fact disconnected (let's say you have both WiFi and Ethernet but still need to detect the cable disconnected, even if WiFi has a good network connection), you will need to use NDISUIO or similar functions to query the PHY-level con...
"NetworkCapabilities.TRANSPORT_CELLULAR"); return true; } else if (capabilities.hasTransport(NetworkCapabilities.TRANSPORT_WIFI)) { Log.i("Internet", "NetworkCapabilities.TRANSPORT_WIFI"); return true; } else if (capabilities.hasTransport(NetworkCapabilities.TRANSPORT_ETHERNET)) { Log.i("Intern...
How can I detect the Ethernet adapter of an RT system/module in the CANoe application tool on the main PC? Answer: When using an RT system/module, the built-in third party Ethernet interface of an RT system/module can be detected by installing the NetworkDriver.msi on the RT system/modu...
Close Registry Editor and reboot your computer. If you want to verify your Ethernet connection is set to metered, you can open Office Outlook 2016 application, which will detect and alert you that you are using a metered connection.
How to remove SMBv1 via PowerShell Here are the steps to detect, disable and enable SMBv1 client and server by using PowerShell commands with elevation. Megjegyzés The computer will restart after you run the PowerShell commands to disable or enable SMBv1. ...
Here are the steps to detect, disable and enable SMBv1 client and server by using PowerShell commands with elevation. Note The computer will restart after you run the PowerShell commands to dis...
Hi, I have the following situation. When I unplugged the network cable from a running ethernet card in a Linux box, there has no sign telling me the cable is unplugged from the system perspective (unless I try to perform socket connect). Does any one kn
Right-click on the connectivity icon from the system tray and choose toTroubleshoot Problems.Once you click on it, it will start detecting the problems. If Windows is able to detect the error, it will automatically suggest you the possible solutions and you can apply them in a single click...