Grab some 1×4 lumber and cut two pieces to 33 inches for the height of the frame and one piece to 24.5 inches for the bottom. You will also need three 23-inch boards to support the top, middle, and bottom of the Plinko board. If your lumber isn’t in the best shape, consider u...
3– Draw a line two inches below the L1 line and cut the strap with the scissors there. Yes, this gives you an excess 1 1/2 inches but leave it alone for now as you may decide that L1 is not quite low enough after testing your side bag. You may also desire to punch one or mo...