Now that the new controller is installed it is time to change the adapter type of the currently installed adapter. For this task the virtual machine must be powered off. Open the virtual machine settings in the vSphere Web Client, expand the settings of the SCSI controller and change th...
Check controller driver/firmware to ensure they are not down to revision or in an unsupported combination by runningesxcli vsan debug controller list -v=truethen check thevSAN HCLif the drivers/firmware are down rev or not in a supported combination then upgrade them. If no issues are found ...
When converting a physical machine to a virtual machine using VMware Converter, if an adapter type is not selected during the initial customization the resulting virtual machine may contain an IDE disk as the primary OS disk. However, using IDE virtual disks have following limitations: 1. IDE di...
After detaching the LUN, it can be as not presented from the storage. However, if the esxcli storage core device detached remove -d NAA_ID command is run to permanently decommission the LUN from the ESXI host before removing the LUN from the storage, the LUN gets reattached to the host ...
On the Options menu, click Edit for Devices, click the Other tab, change Disk controller to SCSI LSI Logic SAS (if not already specified), and click Next (Use Preserve Source only if Technical Support instructs you to). On the Summary menu, review the virtual image summary and click Fini...
3. Launch Hyper-V Manager, right-click on the VM that needs access to the USB drive, and select Settings. 4. Navigate to SCSI Controller, select Hard Drive option you want to attach to the controller and click Add. Note: You can only add drive to IDE controller while the VM is power...
Click OK to continue. Step 2. Install ESXi from USB 1. Connect your bootable USB drive to the host, and change the boot order to boot from the USB drive in the BIOS boot menu. 2. Accept the End User License Agreement (EULA) and proceed. 3. The installer will scan and display all...
[root@localhost:~] /usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -a Listing all system keys: Key Value Instance: vmhba3/Emulex Listing keys: Name: adapter Type: string value: lpfc Adapter Page Emulex LightPulse FC SCSI 10.2.309.8 EMC LPe12002-E 8Gb 2-port PCIe Fibre ...
In the step Customize Settings, you need to pay more attention. Change the SCSI Controller to VMware Paravirtual, and double-check if the Network Adapater is already on VMXNET3. Change it to VMXNET3 if it wasn’t already there In the last step, you can check if everything is correct, ...
Select Use Network Address Translation (NAT) or Use bridged networking to connect and use the internet, as a network type > Next; Select I/O Controller Types as default > Next; Select disk type SCSI > Next > Create a new virtual disk by clicking create a new virtual disk for the virtu...