If you need help, start with your distribution's documentation. Regardless of the distribution, the high-level process usually goes like so:download the ISO burn/copy/transfer it to your install medium (e.g. a CD or USB stick) boot your server from your install medium follow the prompts ...
If you need help, start with your distribution's documentation. Regardless of the distribution, the high-level process usually goes like so:download the ISO burn/copy/transfer it to your install medium (e.g. a CD or USB stick) boot your server from your install medium follow the ...
InLinux, there are a couple of file-sharing protocols used to share storage and files across a network. The most widely used ones areSambaandNFS. Sambais apopular open-source applicationsuite that works in a client-server architecture. It offers cross-platform compatibility enabling seamless file...
5.To run theVMwareinstaller for the first time, you may encounter the following error, which needs to be fixed by installing certain missing prerequisites, including theGNU Compiler Collection,Development Tools, andKernel Headers, which are essential components for the installation process. vmware VMWa...
So, in this article, I’ll show you how to reboot WSL in Windows 11/10. Well, using WSL, you can use both Windows and Linux at the same time by installing a Linux distribution (such as Ubuntu, Kali, Debian, OpenSUSE, Arch Linux, etc.) on your Windows computer. So, you can use...
Use any of the above commands based on your Linux distribution and preferences. Start, Stop, and Restart Nginx using Systemctl Almost all modern Linux distributions adopted using Systemd as the default service manager. Systemctl is a built-in Linux command-line tool that is used to manage and...
after that, it is just setup, it only worked for me when mmc is no read, when I used usbboot with any image that has working mmc 0 it just boot on sd instand of the usb, i could need to flash again my sd and usb to boot again on 8k618 img Edited June 1, 2024 by Kajen...
https://github.com/NickAlilovic/build/blob/main/patch/u-boot/u-boot-sunxi/configs-Transpeed-8K618-T-Add-Transpeed-8K618-T-board-support.patch +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1f12+CONFIG_DRAM_SUN...
Enable it during boot: To have the unit started at boot time you need to enable it: root@ubuntu:/usr/local/src/noip-2.1.9-1# sudo systemctl enable noip2 Disable it during boot: To disable autostart at boot time you must disable the unit: ...
To start NetworkManager: # systemctl start NetworkManager To enable NetworkManager automatically at boot time: # systemctl enable NetworkManager Start Network Service without NetworkManager If we use NM_CONTROLLED=no in ifcfg file, then we will be unable to bring up interfaces with ‘ifup’ command....