If you would add face attributes to the faces with the positive tolerance, you could first use a full path to cut the pocket with the negative tolerance on all faces, then create a separate operation, based on the face attributes that cut only the positive tolerance faces. A bit of ...
Hello to all, There is an option to change the reference set in the existing view of the drawing? For example, I inserted a view in the drawing then added dimensions, tolerances etc. Then I need to change reference sets. Thanks in advanceNX...
did you purchase the driver you were hitting in the bay or a different one? Manufacturers have tolerances and the club you bought might have more or less loft and the shaft could also be a little different. For most people might not be a big thing and for others it could be huge. ...
The Drop DOF setting controls the method of trying to solve over-constrained systems. All the moves are used to generate a set of equations for the system. If Drop DOF is active for a move or set of moves, 3DCS searches through a set of cases (e.g. Plane,Plane, Plane; ...
In the Tolerance, select Add andModeling Points SelectMore…and then theStrings…buttons Add the Plant Data (DCSDB2 file) Activating the Plant Data in a 3DCS Model In order to implement the Plant Data in the 3DCS model, all other tolerances and GD&T need to be deactivated. The reason ...
The journal works with NX 8.5. On the first run it will ask you to select the dimension tabular note; it will add an attribute to the note so that it can be found automatically on subsequent runs. Each inspection dimension will be reported in the tabular note; each will be given a "...
Hello to all, There is an option to change the reference set in the existing view of the drawing? For example, I inserted a view in the drawing then added dimensions, tolerances etc. Then I need to change reference sets. Thanks in advanceNX...