-Plywood, or a material of your choice. I used 1/2" Birch Plywood, then stained it to give it a nice look. About 4'x4' needed -3/4" Hardwood. I used a 18"x18" Aspen board from Home Depot. -Various 3D printed parts, roughly 1kg of plastic needed, depending on infill used. -1...
Your container home is going to be naturally dark (since it doesn't have any skylights or other exterior doors/windows) so a sliding glass door really helps. If you visit my website you will see that the particular container I use allows for 2 standard 72"x80" sliding glass doors, so ...