Now it occurred to me while stripping this down, that you could leave the steam attachment reservoir intact, and funnel the fog juice into it, but that's a project for another day. I used one of the metal box ends and removed the knockout. I then used a 2" bulkhead fitting used wit...
Here is an earlier bulkhead fitting I designed using a 1/4 x 1 inch brass screw, brass nut, and fiber washer. This cap is for the larger 3-liter bottle. I drilled a 1/16 inch hole axially through the length of the screw for the gas passage. The head of the screw is on the ins...
These fissures take many forms: holes drilled into the wood framing where wiring runs from a room below up into the attic; lighting fixtures and electrical boxes; areas where the tops of partition walls in the room below intersect with the attic-floor framing; bulkheads over kitchen and bathro...