and that were the same length in height + depth as the bags, 17”. Using a propane torch I heated and bent the plastic rectangles into two large ell shaped brackets. I drilled holes in the brackets to match the mounting studs on the bike so they too would slip onto the studs and cli...
The brackets are made of 1/4″ MDF and you basically adjust the height by adding or removing pieces to match the height of the material, I plan on cutting some 1/2″ and 1/8″ pieces to give me a bit more flexibility in matching different material heights. They worked fairly well, ...
12 total). Insert the 1/4" bolts that came with the 1" T-Nuts into the 3D printed parts as shown. You can now slide the 12" Aluminum extrusions into the corner brackets. Loosely tighten each bolt so that the extrusions dont fall out, but not so tight so you ...