1.接入摄像头 插入USB 摄像头插入树莓派 USB 口中(注意:摄像头需要支持 Linux USB免驱动) 使用命令lsusb查看插入的USB设备,插入前查看一次,插入后再查看一次,新增的那个就是插入的 USB 摄像头。 使用命令ls /dev/video*查看设备节点,同样插入前后查看一次。 一般用 /dev/video0 就可以了 2.测试摄像头 2.1 抓...
Suitable for devices support miot-spec protocol in LAN 1.小米智能插座2蓝牙网关版 1.1小米智能插座2蓝牙网关版 本地接入homeassistant by xiaomi miot auto 1.1.1下载 github.com/al-one/hass-,将 ./custom_components/xiaomi_miot 文件夹复制到 /config/custom_components 目录下,重启homeassistant。 1.1.2....
HomeAssistantUSB小夜灯控制器 嘉立创产业服务站群 电子产业 嘉立创PCB PCB、FPC制造服务 嘉立创FPC 柔性板5片起订,24小时交货 嘉立创SMT 一站式PCBA服务平台 嘉立创激光钢网治具 激光钢网&治具制造,发货快 嘉立创发热片 20元特价打样,免费下载源文件...
After upgrading the Home Assistant OS from 9.5 to 10.2(red herring, seemy comment below) , and NUT can no longer connect to the UPS after the host system is rebooted. This is caused by the fact, that the USB device of the UPS is no longer recognized by HA OS after reboot. ...
利用三個 USB 接口連接了 Z2M妖神板 與 刷了 OpenMQTTGateway 的 ESP32 做藍芽網關 穩定性還不錯,...
The problem I have HA installed on a QNAP VM Before one of the updates everything was ok, after that the problems started but I ignored them thinking that this is an incidental behavior of the system. The system, after restarting HA or t...
猫盘群晖中安装的homeassistant出现了很多问题，后来不得不在docker中安装。发现矿神的docker面板又更新了...
1、安装home assistant 命令行输入下面命令回车创建ha配置文件夹 mkdir myha 然后输入下面的命令回车创建ha容器 docker run -d --name homeassistant --privileged --restart=unless-stopped -e TZ=Asia/Shanghai -v /root/myha:/config -v /run/dbus:/run/dbus:ro --network=host ghcr.io/home-assistant...
Home Assistant Frigate Integration In Home Assistant go toSettings->Devices & Services->Add Integration->Frigate. Enter the IP address of your NVR VM and use port5000. 3. If everything works as planned, you will now see your camera added to HA. You can also modify the exposed entities an...
集成:https://www.home-assistant.io/integrations/motioneye/ motionEye 是 motion 的 web 封装,基于Python开发,有如下特点 基于网络、移动/平板电脑友好的用户界面 与大多数 USB 摄像头以及 Raspberry PI 摄像头模块兼容 支持IP(网络)摄像机 带有电子邮件通知和工作计划的运动检测 ...