This is a very simple sketch. It checks for serial data and if any is available it checks for a “0” or a “1”. If there is a “0” or a “1” the LED is turned on or off accordingly. Any other characters are ignored. You can check that the sketch works by opening up the...
7.4 Saving / Loading of Settings By pressing the RECALL/STORE key 41 , you can load the current measuring instrument parameters (settings) from memory spaces 0 to 8, or alternatively, store them to me- mory spaces 0 to 8. If the memory space 9 is selected, the factory settings will be...
If one or more ports are configured already, then Advanced NMEA Data Logger is opening these ports and starting logging. If the port is opened successful, then the status bar in the main window displays a status of this port (fig. 1). However, before you should configure port parameters ...
(rechargeable), 1130 mAh Battery operating time Approximately 8 hours (normal mode) Approximately 45 minutes (continuous printing) Battery charger Input: 100 to 250 V AC, 50 to 60 Hz Output: 8.4 VDC/0.8 A, Time required for full charge: 4 h Environmental Requirements Temperature *1 ) ...
But if the message said, "Access to this site has been denied because it has served malware in the last 48 hours," the user would be better informed and understand the potential risk not only to the organization, but to them, as an individual user. Security technologies...
n Using a Magnetic Card P Do not bring magnets near the card, and do not store the card near a device that produces a magnetic field (such as a mobile phone, speaker, or TV). f you do so, the data on the card may be deleted. P Do not leave the card in a high-temperature ...