High cycle fatigue behaviour of Ti-6Al-4V fabricated by metal injection moulding technology. Mat. Sci. Eng. A Struct. 2009, 504, 107-113.O.M. Ferri, T. Ebel, R. Bormannb, High cycle fatigue behaviour of Ti-6Al-4V fabri- cated by metal injection moulding technology, Mater. Sci. Eng...
The effect of building orientation on the very-high-cycle fatigue (VHCF) response of Ti-6Al-4V specimens produced through selective laser melting (SLM) process with three different building orientations (0°, 45° and 90°) has been experimentally assessed. The fatigue performance decreases with ...
S. Nishida and N. Hattori, "Fatigue strength of ion-nitrided Ti-6Al-4V alloy in high cycle region," Surface Treatment: Computer Methods and Experimental Measure‐ ments, vol. 17, pp. 199-208, 1997.S. Nishida and N. Hattori, "Fatigue Strength Of Ion- nitrided T1-6A1-4V Alloy In High...
Fatigue Fracture MechanicsT. Nicholas, D.C. Maxwell, "Mean Stress Effects on the High Cycle Fatigue Limit Stress in Ti6Al4V", in W.G. Reuter, R.S. Piascik (eds.), Fatigue and Fracture Mechanics: 33rd Volume, ASTM, West Conshohocken, 2002....
High cycle fatigue (HCF) and fatigue crack propagation (FCP) behaviors of β-annealed Ti64 alloys having a microstructure of either α colonies or basketweave were studied. It was found that the resistance to HCF of β-annealed Ti64 alloys with a microstructure of α colonies was similar but...
To address this need, the variation in mixed-mode, high-cycle fatigue-crack growth thresholds with crack size is reported for a Ti-6Al-4V turbine blade alloy with a fine-grained bimodal microstructure. Specifically, threshold behavior is examined for large through-thickness cracks >4 mm in ...
12. The fatigue properties are also affected by process-induced defects,i.e. porosity and so-called lack-of-fusion defects that act as internal stress concentrators and have a detrimental effect on the cyclic mechanical response as shown in previous studies,e.g. for Ti-6Al-4V8,9,13,14. ...
C. The role of microtexture on the faceted fracture morphology in Ti–6Al–4 V subjected to high-cycle fatigue. Acta Mater. 58, 3908–3918 (2010). Article ADS CAS MATH Google Scholar Bridier, F., Villechaise, P. & Mendez, J. Slip and fatigue crack formation processes in an α/β...
Lack of fusion voids and micro-cracks present on or near the surface were the prime sites for crack initiation. It has been shown that the as-built surface can cause a significant reduction (up to 40%) in the fatigue strength when compared to machined Ti-6Al-4V. A safe life regime for...
K.: Fretting fatigue crack initiation mechanism in Ti-6Al-4V, Fatigue and Fracture of Engineering Materials and Structures 25, 2002, p. 955-96410.1046/j.1460-2695.2002.00549.xSearch in Google Scholar 11 Groche, P.: Formänderungsgrößen und Tribologie, Vorlesungsskript TU Darmstadt (...