LiquidCrystal lcd(7, 8, 9, 10, 11, 12); 将代码上传到您的Arduino板上,您应该会看到显示的消息“hello, world”,后面是一个从零开始的数字。 示例程序中首先要注意的是以下行: #include <LiquidCrystal.h> 这告诉Arduino我们希望使用液晶库。 接下来,我们必须修改该行。 这定义了Arduino的哪些引脚将连接到...
4位模式需要Arduino的7个I/O引脚,而8位模式需要11引脚。在屏幕上显示的文本,你可以在4位模式做一切,所以示例显示如何控制在4位模式下的2x16 LCD。 硬件要求 Arduino or Genuino Board LCD 显示屏 (和日立HD44780驱动兼容) 焊接到LCD显示屏引脚的排针 10k ohm 电位计 220 ohm 电阻 连接线 面包板 电路 在连...
LiquidCrystal lcd(12, 11, 5, 4, 3, 2); void setup() { // set up the LCD's number of columns and rows: lcd.begin(16, 2); // Print a message to the LCD. lcd.print("hello, world!"); } void loop() { // set the cursor to column 0, line 1 // (note: line 1 is the...
Demonstrates the use a 16x2 LCD display. The LiquidCrystal library works with all LCD displays that are compatible with the Hitachi HD44780 driver. There are many of them out there, and you can usually tell them by the 16-pin interface. This sketch prints "Hello World!" to the LCD and ...