In fact, TPMS has become quite popular for general infill (in place of other lattice shapes), because they are fairly lightweight, fairly strong, and have a shape that makes them self-supporting from any direction. I've also seen a number of papers and posts...
The density of the mixed powder was determined using the weighted average of the densities of AlSi10Mg and copper powders, and the Poisson's ratio and contact friction coefficient in the model were set to 0.3 and 0.1, respectively. The nominal stress σnom, nominal strain εnom, and Young'...
Furthermore, the mechanical properties and the weight increased with the gyroid infill density. Finally, the influence of outside perimeters on specimens under compression was constant. It was found that the gyroid structure presents low anisotropy under compression and it was demonstrated that the ...
The gyroid infill was characterized in order to create a phenomenological law based on bone remodelling laws. The gyroid law was implemented on the analysis FEMAS (opens-source, academic and educational FEM and meshless method software) software which presented the density map as an output. Each ...
The core of the sandwich structure features a gyroid infill pattern, which is known for its mechanical efficiency. The study delves into the effects of deposition temperature on the adhesion between the core and skin layers, as well as the impact of infill density on the overall mechanical ...
The core of the sandwich structure features a gyroid infill pattern, which is known for its mechanical efficiency. The study delves into the effects of deposition temperature on the adhesion between the core and skin layers, as well as the impact of infill density on the overall mechanical ...
Results indicate that although the gyroid infill exhibits cubic symmetry, it is nearly isotropic with a low anisotropy index. The numerical predictions are used to develop semi-empirical equations of the effective elastic moduli of gyroid infills as a function of infill density in order to inform ...
The model to predict properties as a function of relative density fits well with a power-law for n = 2.2. The ability of the Gyroid to absorb energy per kilogram is about seven times lower than that of a solid PLA cube, but it can be used to obtain desired levels of deceleration. It...