This work aims to study the influence of this inner infill geometry on the mechanical properties of PLA parts. Thus, experimental specimens for tensile, compression and bending tests were printed in a 3D printer (Creality Ender3) with \\(100\\%\\) infill and four different orientations: (1...
3D Printing: Parametric Generative 3D Infill Geometries by Rene K. Mueller· published February 9, 2023 Generative Geometries, Generative Infill Geometries, Gyroid, Implicit Form, Neovius, Polyviuw, Schwarz D, Schwarz P, Triply Periodic Minimal Surface Updates: 2023/02/09: finally published 2023...
for qw(infill_first solid_infill_extruder solid_infill_extrusion_width solid_infill_speed); $self->get_field($_)->toggle($have_infill || $have_solid_infill) Expand All @@ -1020,7 +1023,11 @@ sub _update { my $have_top_solid_infill = $config->top_solid_layers > 0; $self->get...
Slicing was performed using Ultimaker Cura 4.8.0 with a 100% infill and layers of 0.2 mm. Figure 3 shows the slicing process from the basic TPMS structure scaled from just one STL to fit in sizes of cubes of 10, 20, 30, 40, and 50 (mm), respectively. Scaling was applied with the...
To prepare, a compression test must be conducted on a solid specimen with the option selected as 100% infill density. This acts as a reference to all the other patterned specimens that are to be tested later. Parameters that were required to be output include the following: compressive ...