Also the backup bios is correct and I did try another ROM, both known working before. TBH, I'm now thinking in replacing the flash chip with a new one and flashing it with a hardware flasher (in the event that I can't re-flash it via software). Update: I removed the bridge ...
Well im curious about that, i have a bricked 6900xt that got bricked while i was attempting to make a kvm(by bricked i mean that it does not give video, and i coulnt flash it with software, but the rgb and fans turn on), even after flashing the vbios to the correct one with a...
I do have a CH341a Flasher. I have included the working P4000 vBIOS, the Original P5200 vBIOS that came on the card, and the somehow partially working one that I suspect still is not fully correct but corrects something in APCI and boots. I do not fully understand how the header ...
But it is trivially easy to overclock using Kepler BIOS Tweaker. Thanks. I found out that the difference is actually normal between two identical cards (according to EVGA forums). Temp did however match at idle after re-pasting. Last edited: Sep 14, 2018 D DIY_glenn macrumors r...
For example I had another 6700xt where I could change the vbios to "wrong" version and with ssid mismatch, as well as a 5700 to 5700xt. This one however, I can't even get back to it's original. Says SSID mismatched, and ERROR: 0FL01, no matter how I try to flash it with ...
So I got an SPI flasher and the custom BIOS and loaded it up. Everything went smoothly, so I reset the CMOS, booted it up, and... There we go, the memory split is adjustable now. I went with a 12:4 split instead of the default 4:12. And it worked. Now I can try running ...
I reflash BIOS, using Nvflash v.5.100, picked up the firmware on the site Techpowerup. I work in DOS. Flasher is constantly required. rom instead. bin, on the site here only. bin. But even loading. rom, writes "GPU mismatch", that any data not contained in the firmware. Help ...