GPIO芯片编号是在Linux内核中根据一定的规则和标准进行的。这些编号的目的是为了方便系统识别和引用特定的GPIO控制器。 在Linux内核中,GPIO控制器通常以“gpiochipN”的形式在系统中表示,其中“N”是一个数字,用于唯一标识该GPIO控制器。例如,我们可能会看到“gpiochip0”、“gpiochip1”、“gpiochip2”等等。 这些...
在内核中,GPIO控制器被表示为在linux/ GPIO /driver.h中定义的结构体gpio_chip的实例: structgpio_chip {constchar*label;structdevice *dev;structmodule *owner;int(*request)(structgpio_chip *chip, unsigned offset);void(*free)(structgpio_chip *chip, unsigned offset);int(*get_direction)(structgpio_...
int gpiochip_add(const struct gpio_chip *chip); void gpiochip_remove(const struct gpio_chip *chip); ``` gpiochip_add`函数用于向内核注册GPIO芯片。它接受一个`gpio_chip`结构体指针作为参数,并将该结构体注册到内核的GPIO芯片列表中。如果注册成功,函数返回0;否则返回一个负值表示错误。 `gpiochip_rem...
GPIOx_BSRR低半字用来置位GPIOx_ODR,即写入“1”,而高半字用来复位GPIOx_ODR,即写入“0”。GPIOx_BSRR旨在对GPIOx_ODR寄存器进行原子读写操作,它只能在字、半字、字节模式下被访问对GPIOx_ODR进行原子操作。 4、1个32位锁定寄存器:GPIOx_LCKR 锁定寄存器GPIOx_LCKR的每个锁定位用于锁定端口位的配置。冻结的...
Linux GPIOChip 是 Linux 系统中用于管理和操作通用输入输出(GPIO)引脚的一个组件。以下是关于 Linux GPIOChip 的基础概念、优势、类型、应用场景,以及遇到问题时的解决方法和原因分析。 基础概念 GPIO(通用输入/输出):是一种电子接口,用于将微处理器与外部设备连接,可以用作数字输入或输出引脚,用来读取或控制外部电...
* If chip->base is negative, this requests dynamic assignment of * a range of valid GPIOs. */ int gpiochip_add_data(struct gpio_chip *chip, void *data) { unsigned long flags; int status = 0; unsigned i; int base = chip->base; ...
从ti-processor-sdk-linux-am57xx-hs-evm-06_03_00_106(内核 v4.19)迁移到 ti-processor-sdk-linux-am57xx-hs-evm-08_02_01_00(内核 v5.10)时、我们观察到 gpiochip 枚举顺序错误。 DTS 已正确迁移、电路板正常启动。 以太网、i2c、SPI 等操作正常运行。
gpiochip_is_requested函数是Linux内核中用于检查特定GPIO引脚是否已被请求的函数。这个函数的定义通常在Linux内核源码的GPIO子系统中可以找到。例如,在Linux内核源码树的drivers/gpio/gpiolib.c文件中,你可能会找到类似的函数定义。 2. 理解gpiochip_is_requested函数的参数 gpiochip_is_requested函数通常接受一个指向gpi...
I looked through the low-level Linux gpio code and there is a state called PIN_CONFIG_PERSIST_STATE, but I could not see if there is a configuration using this. Here is a section of dmesg [ 34.853984] gpio gpiochip6: Persistence not supported for GPIO 6 ...
从ti-processor-sdk-linux-am57xx-hs-evm-06_03_00_106(内核 v4.19)迁移到 ti-processor-sdk-linux-am57xx-hs-evm-08_02_01_00(内核 v5.10)时、我们观察到 gpiochip 枚举顺序错误。 DTS 已正确迁移、电路板正常启动。 以太网、i2c、SPI 等操作正常运行。