Past co-processor projects including GPUs, FPGAs, and DSPs do not scale well with new devices. This summer we would like to implement a purely open source three step approach [1] that would improve the state of GNU Radio co-processing for years to come.Alfredo Muniz...
Hardware USRP-2920 USRP-2953 USRP X310 USRP-2900 USRP-2901 Software LabVIEW Driver NI-USRP OtherGNU Radio This article describes how you can use your NI-USRP device with GNU Radio, and whether or not you can return it to compatibility with LabVIEW....
Gqrx is an open source software defined radio (SDR) receiver implemented using GNU Radio and the Qt GUI toolkit. Currently it works on Linux and Mac with hardware supported by gr-osmosdr, including Funcube Dongle, RTL-SDR, Airspy, HackRF, BladeRF, RFSpace, USRP and SoapySDR. Gqrx can ope...
GNU Radio 3.8.2 GNURadio 3.8.2 is already installed on the latest Kuiper version, but if for some reason you have to install it, here is how: apt-get update apt install gnuradio -y ldconfig Post installation For 3.7,GNURadio will recommend you include ...
GNU Radio SDR LoRa Rx/Tx testbed Highlights of the gr-lora_sdr project: Sends and receives LoRa packets between USRP-USRP and USRP-commercial LoRa transceiver (tested with Adafruit Feather 32U4 RFM95 and Dragino LoRa/GPS HAT). Supported parameters ...
It is now finally time to put some code on the hardware. If everything has gone well up to this point, you are almost done with this guide. Make the project in STM32CubeMX Open up STM32CubeMX and hit “New Project”. At the top, go over to “...
RTL-SDR FM Radio Receiver With GNU Radio Companion: RTL-SDR is currently very popular topic on the Net. There are also many guides on how to use it on Windows and Linux too. But starting to use it myself I haven't found any guide that explains whole proc
In order to use an SDR instead of physical hardware radios, Adrian's article describes how a fork of MMDVM called MMDVM-SDR is used in his system as this allows the code to run on a normal Linux computer with an SDR. GNU Radio running on Adrian's own QRadioLink software is then used...
Report detailed information on UHD-supported Software Radio Peripherals attached by USB, network, or embedded configuration. Details include unit names, revision numbers, and available sensors on all attached USRP motherboards and daughterboards.
Gqrx is an open source software defined radio (SDR) receiver implemented using GNU Radio and the Qt GUI toolkit. Currently it works on Linux and Mac with hardware supported by gr-osmosdr, including Funcube Dongle, RTL-SDR, Airspy, HackRF, BladeRF, RFSpace, USRP and SoapySDR. Gqrx can ope...