It can be used with recuperated or simple cycles depending on whether recuperator is fitted. In case of the recuperated cycle, a recuperator is one of major components. The durability of the recuperator is evaluated by FEM (Finite Element Method) analysis. In this paper, requid VOCs disposal...
As a result, the first ilr (ilr.1) for each reaction pathway is similar to the reaction quotient (Q) used to calculate the change in Gibbs free energy. Using this approach, the principles of compositional data analysis and the law of mass balance holds, such that changes in the ...
As a result, the porous media model is used to replace the complex perforated structure at the sieve tray in this study, which has been validated for the measured data for both the small- and full-scale FGD tower. Under a lower inlet gas volume flow rate, the simulation result of the ...
In order to clarify the environmental impacts of power regenerated through hydrogen-fueled gas turbines, this work details a life cycle model of the greenhouse gas (GHG) and NOx emissions of the power regenerated by power-to-H2-to-power (PHP) technology integrated with a combined cycle gas ...
Indeed, due to its advantages of high sensitivity, stability, and low cost, ZnO nanostructures have been widely used for detecting gases such as H2, NH3, CH4, CO, NO2 ethanol, and acetone [13–18]. Recently, different 2D ZnO nanostructures with thickness close to the space charge region ...
Thereby, the ENASG EOS is also used to describe liquids transitioning to their supercritical state. The transition is then continuous. At much higher temperatures, thermal agitation becomes the dominant effect. The ideal gas description is then to be used in this context. However, as two ...
1. Introduction The jet-in-crossflow (JICF) method is a conventional, classical method that is mainly used in air-breathing propulsion systems. A JICF breaks the spray to mix the fuel and air using a large amount of air entering the combustor, and this method has advantages from the ...