Add warmth, comfort and ambiance with our lineup of gas, electric and wood fireplaces, inserts and log sets.
The gas supplied is measured at the metering station and goes through a filtering system and a pressure vessel (expander) before feeding the compressors. At the compressors, the gas reaches pressures of around 250 atm and is ready to be made available at the fueling stations or sent to fixed...
Working gas is defined as the amount of natural gas stored underground that can be withdrawn for use. Its storage capacity can be measured in two ways: design capacity and demonstrated maximum working gas capacity. The contiguous United States consists of the country's 48 adjoining states, plus ...
which will increase steadily if gas is present in the return mud. However, the sensitivity of this method is usually very low. Another common method involves mass flow measurement in the return mud line using Coriolis flow meters, but it requires that ...
Working gas is defined as the amount of natural gas stored underground that can be withdrawn for use. Its storage capacity can be measured in two ways: design capacity and demonstrated maximum working gas capacity. The contiguous United States consists of the 48 adjoining states of the United St...
[109] and with the measured temperature data of a conventional well and a gas hydrate-well drilled in China and Indian, respectively. The effects of the pumping rate, Joule-Thomson effect and injection drilling-mud temperature, and temperature profile distribution in the annulus were evaluated ...
The concept of accessibility relies on the probe size, and a probe of the radius of 1.8 Å is used in our work in order to directly relate the pore volumes to experimentally measured Nitrogen (kinetic diameter of 3.64 Å) isotherms. Accessible volume calculated here is also defined ...
Production scenarios were performed on a sandstone core, and asphaltene deposition was measured by measuring the asphaltene content at the inlet and outlet. The results showed that the lowest asphaltene deposition occurred due to natural depletion, but the highest asphaltene deposition was observed (...
The volumetric flow rate of the injected argon gas is usually measured in the “cold”, standard temperature and pressure (STP) condition well before entering the nozzle, in standard liters per minute (SLPM). This is usually much smaller than the flow rate entering the molten metal in hot ...
MCF is an abbreviation that refers to the way natural gas is measured in the United States, in which the imperial measuring system is used.