Hi, I'm attempting to use fw_printenv/fw_setenv commands to access the uboot environment on my board. The issue is that the required fw_env.config
--使用Java配置--> <context-param> contextClass org.springframework.web.context.suppor...
产生fw_setenv用ln -s fw_printenv fw_setenv 要使用fw_printenv还需要将fw_env.config复制到rootfs...
默认状态下,请将fw_env.config文件拷贝到目标机的文件系统的/etc目录下。然后结合uboot配置中定义的ENV区和Linux下mtd分区的情况修改配置文件。具体的修改方法见fw_env.config文件中的说明及/tools/env/README文件。 3、fw_printenv工具的使用 其实fw_printenv使用起来和uboot下的printenv和setenv指令是一模一样的...
fw_env.config hostapd-rescue.conf linkplay-emu 836-mt7688-i2s-audio-crash-workaround.patch 842-linkplay-os-workaround.patch defconfig linkplay-firmware-bin.diff mpd-config.diff mt7628an_linkplay_a31-mk.diff mt7628an_linkplay_a31.dts prepare-openwrt-a31.sh ...
fw_env.config fw_env.config default directory is in the /etc/ 如下 AI检测代码解析 /dev/mmcblk1 0x400000 0x2000 1. uboot/include/configs/imx8qxp_mek.h 0x2000: #define CONFIG_ENV_SIZE 0x2000 0x400000: #define CONFIG_ENV_OFFSET (64 * SZ_64K) ...
PetaLinux通过fw_printenv访问u-boot中的环境变量 1、u-boot配置: petalinux-config -c u-boot 2、在/project-spec/meta-user/conf/petalinuxbsp.conf中添加以下内容: IMAGE_INSTALL_append += "u-boot-fw-utils" 3、可以通过在u-boot中执行saveenv生成uboot.env文件 4、修改配置文件/...
11 changes: 10 additions & 1 deletion 11 tools/env/Makefile Original file line numberDiff line numberDiff line change @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk HOSTSRCS := $(SRCTREE)/lib/crc32.c fw_env.c fw_env_main.c HOSTSRCS += $(SRCTREE)/lib/ctype.c $(SRCTREE)...
this is my fw_env.config, it seems correct # cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR...
我使用 eMMC 作为引导设备(不存在 SD 卡)。 并安装了 libubootenv (从 TI 办公室 Yocto 构建)。 但是 fw_printenv 无法在 Linux 中获取默认环境。 我认为/etc/fw_env.config 文件中的配置不正确。 下面是配置、0x6A0000和0x20000来自 uboot def 配置文件(CONFIG_ENV_O...