the PC network port to the WAN port or LAN port on the ECC800-Pro based on the access network. Step 2 Configure the PC IP address and the WAN1 IP address in the same network segment. If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and default ...
Using the same certificate for a long time increases the probability of being cracked. Replace the current certificate periodically. Prerequisites The NetEcoapp has been installed. You have applied for a new certificate file server.cer from the CA. server indicates the name of the certificate file...
HCM Extracts is a flexible tool for generating data files and reports. This topic covers how we can use the extract components to define what information we want the application to extract and report on. It also explains how the application displays, formats, an...
On theOptionspage, clickAdvanced, and then clickSettingsunderNetwork. In the displayedConnection Settingsdialog box, selectManual proxy configuration, setHTTP proxyandPort, and clickOK. Close theOptionstab page. NOTE: To ensure that the proxy server can access theNetEcoserver, the network bandwidth...
You have obtained the IP address of the ECC800-Pro as well as the user name and password for WebUI login. Procedure Download and install the FusionModule app from Huawei AppGallery. Before the installation, ensure that the PAD is connected to the Internet and the network is running properly...
the PC network port to the WAN port or LAN port on the ECC800-Pro based on the access network. Step 2 Configure the PC IP address and the WAN1 IP address in the same network segment. If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and default ...
Link Enable the connection between the device and the WiFi network. IP UPS IP address, which can be obtained from the LCD. Port The port number is 443 by default and can be modified. If the UPS is managed using the app, the port number must be set to ...
Network IP address allocation Automatic (DHCP) Param. System Single/Parallel Single Param. Output frequency Set as required Output voltage level Set as required. Output voltage level refers to the line voltage. Battery capacity Battery capacity = Number of cells x Number of ...
the PC network port to the WAN port or LAN port on the ECC800-Pro based on the access network. Step 2 Configure the PC IP address and the WAN1 IP address in the same network segment. If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and default ...
Network IP address allocation Automatic (DHCP) Param. System Single/Parallel Single Param. Output frequency Set as required Output voltage level Set as required. Output voltage level refers to the line voltage. Battery capacity Battery capacity = Number of cells x Number of ...