問題: Fusion 360で曲線状シートメタルボディに展開を使用する場合、ボディは展開されません。 原因: フィーチャ(カット、押し出し、回転など)がボディに追加され、曲げられた状態では、シートメタル規則への準拠が損なわれました。 解決策: 次の手順を使用して...
Fusion 360 Tutorial: Text on a Curved Surface! 4th Axis CNC Machining on Tormach with Fusion 360! OxTools Challenge: Machining a Toothpick Tormach microARC 4th Axis Machining! Fusion 360 Sheet Metal Getting Started with Fusion 360 Sheet Metal ...
问题: 选择面以放置草图的操作不起作用。 原因: 草图必须位于平面或平面上。在通过圆柱体切割字母等形状时,曲面将弯曲,尽管用于切割圆柱体的初始几何体是平的。 解决方案: 为此,解决方法是展平曲面,然后根据需要一起放样面。 在需要展平的几何图元上方和垂直于该曲线
创建需要凸雕\凹雕的草图或文本。 转到“创建”。 选择“凸雕”。 选择草图或文本作为草图截面轮廓。 选择模型上的曲面作为面。 在“效果”选项中,选择“凸雕”或“变形”。 在选择“确定”之前,进行任何其他必要的更改。 另请参见:YouTube |在Fusion中使用凸雕包裹文本(最后!!!)此...
I'm not actually sure what 'fully defined' is referring to? I had hidden a large amount of the geometry in the drawing to make the splines I was highlighting stand out.. not sure if thats what you mean't I noticed that there are a lot of nodes in the spline and ...
Drawing workspace Let’s round things out with a look at the Drawings workspace. This has been in the system for a year or more now and each release brings new tools that are fleshing out the capabilities you need to not only create accurate drawing views, but also to add in those dime...
Performance is a key area of focus for us, evident of some of the improvements we’ve made over the past few product updates. This update continues to improve on the usability and modeling performance of Fusion 360, specifically around large assembly and drawing workflows. Here are the highligh...
drawing a line in a sketch, then right clicking that sketch to extrude it. This extrusion becomes a surface, which can be used to split the three bodies. Make sure this extruded surface completely intersect the bodies that needs to be cut. To split the bodies, click on "Modify" and ...
modified and managed in 2D drawing and 3D model. As an information source, the HBIM model can continuously increase and update data information over time, and centralize related data information to avoid data isolation and loss. In past research, some scholars have been studying the information re...
Setting tolerances depends on operation surface requirements, machine tool dynamics, feed-rate expectation, and machine tool look ahead capabilities. In Fusion and HSM CAM programs, it is recommended to start with a tight enough tolerance to accurately capture the model geometry and then apply...