This research communication deals with nonlinear mixed convection and entropy generation analysis of second order velocity slip flow of viscous fluid by a variable thicked stretchable surface of disk. The stret
2 SPECIFIED WALL TEMPERATURE AND In 1953, Clark and Kays [94], the first investigators to analyze rectangular ducts in detail, numerically evaluated fully developed NuT for α* = 0, 0.5, and 1. Miles and Shih [393] refined this treatment by employing a finer grid for the finite differenc...
1. The machine adopts synchronous control of three servo motors, automatic taper tension structure, and center surface rewindingmethod;2. The machine adopts frequency conversion speed regulation to keep running smoothly during acceleration;3. Automatic meter counting, alarm and o...
doi:10.1007/s11249-022-01636-wContact mechanicsCoupled partial-slip contactSurface roughnessFrictionTribology Letters - By adopting a global search method for all shear tractions in the contacting area and using an alternative convergence criterion regarding load balance in the lateral direction,...Wang...
surface analysis, capable of easily detecting a landslide through the prediction of a safety rate change according to the fine deformation of the ground by calculating the safety rate of a sloping surface based on the change of a shear surface and the displacement and pore pressure of a soil ...
If free surface positions ηcs(xcs) and ηseine3d(xcs) differ on the CS side of Ωoverlap, the seine3d vertical velocity profile specified on Γc,csD does not match the geometry of the water phase in the interior of the CS domain. As the imposition of this velocity profile comes along...
These data can be used both as a technical reference under the specified conditions, and as a means of comparison between model predictions (which include operating conditions, and sample components and behavior) and laboratory-scale data. Conflict of interest The authors wish to confirm that there...
breakdowns in communication between client and host devices. The user must specify the IP address of the destination PC that will receive the data in the serial-to-Ethernet device server. The IP address of the serial-to-Ethernet device server must be specified in PPMS as illustrated inFigure ...