Respective pressure sensors are mounted on the movable portions 41c, 41d and 41b, and by rotating the driving axes 42c, 42d and 42b, the pressure sensors can be controlled to move in the direction of the contact with the finger by the relation of gears of pinions and racks by rotating...
diesel combustion intakes and exhausts, water utilities and waste removal utilities. Analysis and research has illuminated the difficulty of infiltration by many of these methods due to the collapsed structure and blockades. One of the most promising ways to infiltrate a collapsed structure is through...
Three-tool geometry factors of simultaneous CEA, IA and nose radius are selected as the test variables to find their effect on the cutting force. Consequently, nine trails are set using the OA of Taguchi method. Hence the obtained response variables, based on the analysis of variance (ANOVA)...
In this electromechanical brake-by-wire system, the use of conventional disk brakes, a decentralized actuation device at each wheel, and concepts pertaining to completely dry gears were introduced. The braking-force estimation was performed by measuring the rotating displacement of the servomotor. The...
(3)Analysis of sound transmission loss through multiple structures containing foam alumium,Advanced materials research,2011.8 (4)simulation and analysis of flow field inside foam aluminum muffler,proceedings of the fourth international conference on modelling and simulation,2011.6 ...
This chapter presents the dynamic balancing technique for shaking force and shaking moment balancing of six- and eight-bar planar mechanisms. Shaking force is balance by the method of redistribution of mass and shaking moment by geared inertia elements. The planetary gears used to balance shaking mo...
Xiao, Z., Cheng, Y., Xiang, Z., Wang, X.: Dynamic simulation and scale model experimental analysis of planetary gears train of semi-direct drive wind turbine. In: 2015 IEEE International Conference on Information and Automation, pp. 2022–2025 (2015) ...