It is important to maintain sufficiently high flue gas temperatures in order to avoid condensate and acid corrosion problems, and to ensure complete combustion of the fuel. MAINTENANCE Each chimney must be designed to allow for easy inspection; sweeping should be carried out by competent persons. ...
The other part condensate water enters RH4 with the same parameters at the outlet of RH5 after being heated by the PCH. The feed water at the outlet of the feed water pump flows into RH3–RH1 and the boiler. The heated feed water enters the boiler with same parameters at the outlet ...
The boiler losses were also related to the latter two parameters. The impact of the latter factors was identified, and the relative error did not exceed 4.5%. 2.2. Ramping Rate The impact of primary frequency control to the thick-wall components and their lifetime expectancy was presented in ...
Another option would be to measure the NOxNOx concentration in the dry off-gas in combination with a quantitative analysis of the nitrate in the condensate. But this would pose additional challenges as it would require measurement of the condensate mass flow and additional chemical analytics on ...
Another option would be to measure the NOxNOx concentration in the dry off-gas in combination with a quantitative analysis of the nitrate in the condensate. But this would pose additional challenges as it would require measurement of the condensate mass flow and additional chemical analytics on ...