The common error of "The disk is write-protected" will occur when you trying toformat an external disksuch as (USB flash drive, SD memory card, or pen drive). If you start to copy or modify the files on the drive, the pop-up window show you "The disk is write-protected. Remove t...
“The drive is write-protected. Remove the protection or use a different drive”. In this article, we will analyze the causes and solutions to this problem.
💻Goal Fix PNY 128 GB Flash Drive Write Protected 🧰Preparation Computer, PNY 128 GB flash drive, EaseUS Partition Master 🔒Difficulty ✔️[Easy] EaseUS Partition Master ✔️[Medium] Firmware upgrades ✔️[Complex] Diskpart, Registry Editor 🛠️Tools 1. Remove Write Protec...
If the drive shows as "write-protected" or doesn't allow partition deletion, it often stems from software or hardware restrictions. 1. Check the Physical Switch:Some USB drives have a small switch that enables write protection. Ensure this switch is in the unlocked position. 2. Remove Softwar...
Step 6.Click "OK". You should now do a successful change in the read/write permissions. Fix 3. Remove Write Protection from a USB Stick or Memory Card Using CMD In the event that Windows fails to format a disk with error messages like "the disk is write protected", you have to remo...
listed volumes. If it is so, click on it. In the same window, you will see the description of the flash disk. If you see a Healthy sign, just right-click and select Open. If the flash card is not found in the listed volumes, try to insert and remove the flash drive one more ...
Solution 1: Check if the USB is write-protected Want to know how to save stuff on a flash drive that has a switch? If such a switch is turned off you will not be able to write anything onto it. Therefore turning on the switch is the way out of this trouble. The below image will...
partition, this will allow you to write protect it. To remove the write protection status, re-run the utility and set the radio button to Enable. Note that no password is required, so anyone can un-write-protect the ‘disk(s)’. The CDROM/DVD ‘disk’ is always wr...
2. Do not remove the USB flash drive during use, otherwise data may be lost. 3. After using a USB flash drive, it is best to safely eject the USB flash drive on your computer, which will help to extend its storage life. 4. Please use FAT32 or exFAT to...
I have my usb in "current-read only state=Yes" or "Write Protected".I have tried a lot of solution but coultn't work any one. Methods that i have tried 1. Regedit-> strorage device policy->1->0 2. Diskpart through cmd 3. RMPrepUSB 2.1.600_REL 4. Ufix-|| In Ufix-|...