The valve plug is directly arranged between a first formed body forming the suction device and located adjacent to the water flow and a second formed body likewise located in the connecting socket on the side of the pressure expansion vessel. The formed bodies and the valve plug have coaxial ...
A ball valve (72) has a ball-shaped valve plug (90), by means of which the water exchange flow connection between the through passage channel (68) and the pressure expansion vessel can be cut off and in its place a connection of the expansion vessel with an outlet (132) can be ...
A molded body (26) has a middle part (30) containing an inner duct (46) as part of the backward path ad protruding into the water-flow. an outer duct (42) of the molded body as part of the forward path is connected to the water flow by means of an inlet extending round the ...
A partition plate (4) is held inside a vertical bore with a non-circular profile, enabling the position of the plate to be adapted to different installation and flow requirements. The bore extends through an externally threaded screw fitting (1).SCHMITTER, WOLFGANG...
A ball valve (72) has a ball-shaped valve plug (90), by means of which the water exchange flow connection between the through passage channel (68) and the pressure expansion vessel can be cut off and in its place a connection of the expansion vessel with an outlet (132) can be ...
The dividing wall extend into the T-bar, where it has an aperture (10). This is part of the main flow channel, and forms the suction unit. A tubular body (12), formed by a Venturi nozzle, is fitted into the aperture in the dividing wall. A ring body of larger diameter is fitted...
Uneven heat transfer between the connecting parts leads to the nonlinear growth of the spigot interference pressure and warping deformation of the mounting edge, which will lead to an initial non-fitting of the mounting edge and will seriously affect the application of the pressing force [7], ...