Fire•Lite’s MS-9600LSC is a compact, cost effective, intelligent addressable FACP (Fire Alarm Control Panel) with an extensive list of powerful features. The combination of Fire•Lite’s newer series devices and legacy 300 Series devices, along with the MS-9600LSC FACP , offer the ...
The Fire•Lite MS-9200 is a compact, cost-effective, addres-sable fire alarm control panel with a capacity of 198 Fire•Lite 300 Series devices. A single Signaling Line Circuit (SLC)loop supports up to 99 smoke detectors and 99 control or monitor modules. The panel uses surface-mount ...
on the sensor address switches. (See Figure 1.)3. I nstall the sensor into the sensor base. Push the sensor into the base while turning it clockwise to secure it in place.4. A fter all sensors have been installed, apply power to the control panel and activate the communication line.5...
detectors being monitored must be two-wire-compatibility-listed with the modules. The MMF-302-6 transmits the status of a zone of two-wire detec-tors to the fire alarm control panel. Status conditions are reported as normal, open, or alarm. The interface module supervises the zone of ...
PN: 51335:E ECN 03-352 Fire Alarm Control Panel MS-9600/MS-9600E IMPORTANT! The SLC Manual Document #51309 must be referenced in addition to this manual when installing or servicing the Fire Alarm Control Panel. EDocument #51335 7/9/03 Revision: Fire Alarm System Limitations While a ...
tech-nology. LiteSpeed™ is a patented technology that polls 10devices at a time looking for new or different information.When new information is found at a specific address, the sys-tem polls that device several times for any new data. This improvement allows a fully loaded panel with up...