}//生成指令序列voidmakeInstructionSequence(int* instructionSequence){//在[0,319]的指令地址之间随机选取一起点m//第一个起点小于319,因为后面要顺序执行的话,320会超出[0,319]的范围intm;//save在前地址选取指令中用于存储mintsave; m =myrandom(0,318);for(inti =0; i <320; i +=4) { instruction...
Instruction , identify the registers and memory locations . When an instruction is executed by the processor , the item is loaded from the memory location , shifts the data in the register , in order to insert an item into the register , shift and insert operation is performed .マオゼン...
第30章 STM32H7的USART应用之八个串口FIFO实现 本章节为大家讲解STM327的8个串口的FIFO驱动实现,后面的ESP8266,GPS,RS485,GPRS等试验都是建立在这个驱动的基础上实现。 除了串口FIFO的驱动实现,RS232通信也通过本章节做个讲解。 30.1 初学者重要提示 30.2 硬件设计 30.3 串口驱动设计 30.4 串口FIFO板级支持包(bs...
In iLLD function, IfxCan_Can_readMessage() , when this line code is executed IfxCan_Node_readData(rxBufferElement, message->dataLengthCode, data); the CPU0 runs into Instruction Error Trap. Actually, this line code in IfxCan.c, function IfxCan_Node_readData() causes...
= MPU_INSTRUCTION_ACCESS_ENABLE HAL_MPU_ConfigRegion(&MPU_InitStruct); /*使能 MPU */ HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT); } /* *** * 函数名: CPU_CACHE_Enable * 功能说明: 使能L1 Cache* 形 参: 无 * 返回值: 无 *** */ static void CPU__Enable(void) { /* 使能 I-Cache */...
SubRegionDisable = 0x00; MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE HAL_MPU_ConfigRegion(&MPU_InitStruct); /* 配置FMC扩展IO的MPU属性为Device或者Strongly Ordered*/ MPU_InitStruct.Enable = MPU_REGION_ENABLE; MPU_InitStructBaseAddress = 0x60000000; MPU_InitStruct.Size = ARM__...
本章节为大家讲解STM32H7的低功耗串口FIFO驱动实现和停机唤醒。 66.1 初学者重要提示 66.2 硬件设计 66.3 串口驱动设计 66.4 串口FIFO板级支持包(bsp_lpuart_fifo.c) 66.5 串口FIFO驱动移植和使用 66.6 实验例程设计框架 66.7 实验例程说明(MDK) 66.8 实验例程说明(IAR) ...
本章节为大家讲解STM327的8个串口的FIFO驱动实现,后面的ESP8266,GPS,RS485,GPRS等试验都是建立在这个驱动的基础上实现。 除了串口FIFO的驱动实现,RS232通信也通过本章节做个讲解。 30.1 初学者重要提示 30.2 硬件设计 30.3 串口驱动设计 30.4 串口FIFO板级支持包(bsp_uart_fifo.c) ...
FIFO(first-in,first-out) memory first-in first-out queue is a traditional sequential execution method. The first-entered instruction is completed and retired first, and then the second instruction is executed. It is a fi
本章教程为大家介绍STM32H7的GPIO应用之按键FIFO,这个方案已经在实际项目中千锤百炼,比较实用。 19.1 初学者重要提示 19.2 按键硬件检测 19.3 按键FIFO的驱动设计 19.4 按键板级支持包(bsp_key.c) 19.5 按键FIFO驱动移植和使用 19.6 实验例程设计框架