fifo_generator v13.2 一、概述 1.xilinx fifo IP core是先进先出的内存队列,非常适合顺序存储和数据检索的应用。 2.最高时钟性能可以达到500MHZ; 3.可以自定义位宽,深度,状态标志信号,内存类型,读写类型位宽和深度的ratio; 4.fifo core支持三种接口类型:native interface;axi_memory_map;axi4-stream; 5.native...
xilinx最新FIFO Generator v13.2 中文版 最新版xilinx ip核 FIFO Generator v13.2,欢迎大家下载一起交流资源。 xilinx ip核 fifo v13.22019-08-05 上传大小:10.00MB 所需:48积分/C币 xilinx-ise-14.4-licence xilinx-ise-14.7-licence xilinx_ise_14.4_licence xilinx_ise_14.7_licence...
我使用的是非对称独立时钟,FWFT FIFO,64位输入和128位输出。我把它配置为2个同步阶段。两个时钟都运行125MHz,但它们彼此不同步。写入端周期性地将64位字写入FIFO,如 ...
9月 23, 2021 Knowledge 标题 68172 - 2016.3: FIFO Generator v13.0 - Empty flag does not de-assert after reset in Asynchronous FWFT FIFOs Description In the FIFO Generator core, an empty flag does not de-assert after reset in Asynchronous First Word Fall Through (FWFT) FIFOs for the follow...
如果真的在Vivado工具路径的仿真库下没有找到这个fifo的v13_2_1版本的库文件(直接到vivado工具路径下去搜索就行)，那么建议打开Vivado工具的IP界面，看下fifo IP的版本，和你缺的这个是否能对应上，如果你缺的这个版本太低，那么你可能需要到低版本的Vivado工具，或者老的ISE工具路径下去搜索了，因为你的工程代码...
66243 - VCS MX - Failure when trying to compile FIFO Generator v13.0 using vhdlan: "The actual error message has been suppressed for security reasons. Please contact the vendor of this file for resolution of this problem" Description
Good morning, I am exploiting the FIFO Generator v.13.2 with the following configuration:- Data length 32-bit R/W, FIFO length is 4096, Native I/F; - Independent Clocks, Block RAM implementation, 2 sync stages;
Hi all, When trying to compile the fifo_generator_v13_2_vhsyn_rfs.vhd library using Cadence Xcelium tool, I have the following error: xmvhdl_p: *E,ERRIPR: error within protected source code. I am using Xcelium 20.03-s008 and have launched the following c...
67912 - FIFO Generator v13.0 - UltraScale/UltraScale+ Built-in FIFO does not come out of reset, rd_rst_busy and wr_rst_busy signals are stuck high Description I have a FIFO generator IP with Built-in FIFO configuration. Sometimes the built-in FIFO does not come out of the reset state...
66243 - VCS MX - Failure when trying to compile FIFO Generator v13.0 using vhdlan: "The actual error message has been suppressed for security reasons. Please contact the vendor of this file for resolution of this problem" Description I receive the following error when tryin...