gatea20active设置为Fast或Normal。允许用户做基本的系统组态以及硬件参数的设置，改变后的数据储存在靠电池电力维持的CMOSRAM中，所以即使断电数据也可以得到保存一般来说，保存在CMOSRAM中的信息是不会发生改变的除非系统组态发生变化，例如硬盘装置更换或者是新硬件的加入。gatea20active设置方法 A20地址线的...
Gate A20 Option（Gate A20的选择）：此项用来设定Gate A20的状态。A20是指扩展内存的前部64KB。当选择缺省值Fast时，Gate A20是由端口92或芯片组的特定程序控制的，它可以使系统速度更快。当设置为Normal时，A20是由键盘控制器或芯片组硬件控制的。
aHe tried 用那把钥匙打开门 He tried turns on with that the key the gate[translate] a案主是有工作能力,但沒有工作意願.因此在提到工作問題時,常常會逃避或用生病來做藉口. The document host has the working ability, but has not worked the wish. Therefore in mentioned when work question, can ev...
aplotagem plotagem [translate] aThe requirement of heat aging will be the deviation of melt flow rate before and after experiment 热老化的要求将是融解流速的偏差在实验前后 [translate] apattertn pattertn [translate] aGate A20 option [Fast] 门A20选择[快速) [translate] ...
求翻译:Gate A20 option [Fast]是什么意思?待解决 悬赏分:1 - 离问题结束还有 Gate A20 option [Fast]问题补充:匿名 2013-05-23 12:21:38 A20门电路选项[快] 匿名 2013-05-23 12:23:18 备选案文A20门[迅速] 匿名 2013-05-23 12:24:58 门A20选择[快速) 匿名 2013-05-23 12:26:38...
求翻译:gate a20 option fast是什么意思?待解决 悬赏分:1 - 离问题结束还有 gate a20 option fast问题补充:匿名 2013-05-23 12:21:38 A20门电路选项快 匿名 2013-05-23 12:23:18 备选案文A20门快速 匿名 2013-05-23 12:24:58 门a20选择斋戒 匿名 2013-05-23 12:26:38 快速门 a20 ...
4短2短3短 键盘控制器（8042）中的Gate A20开关有错，BIOS不能切换到保护模式 4短2短4短 保护模式中断错误 4短3短1短 内存错误（内存损坏或RAS设置有误）4短3短3短 系统第二时钟错误 4短3短4短 实时时钟错误 4短4短1短 串口错误 4短4短2短 并口错误 4短4短3短 数学协处理器出错 你好...
With VisionWorks, the Jetson was able to identify features relevant to driving across the golden gate bridge. It was able to use parallax to build a point cloud of a parking lot. The Jetson TX2 was stabilizing video in real time. A laptop could do this, but a Pi couldn’t. ...
The MCM63Z736 (organized INas 128K words by 36 bits) and the MCM63Z818 (organized as 256K words by R,18 bits) are fabricated in Motorola's high performance silicon gate CMOS TOtechnology. This device integrates input registers, an output register, a 2–bit Caddress counter, and high ...
DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION....