By commands "ls mmc 2:1" and "ls mmc 2:2" I can see files on kernel and rootfs partitions. In the end of boot log I can see that kernel see mmcblk3 device and both partitions but can't mount it: mmc3: tried to reset card, got error -110blk_update_request: I/O error, dev...
an error was reported: "E1016 07:45:28.510994 60908 remote_runtime. go: 176]" RunPodSandbox from runtime service failed "err=" rpc error: code=Unknown desc=failed to create containerd task: failed to create ship task: failed to mount rootfs component: invalid argument: ...
After DDR3 calibration, I recompile and get the following error: rootfs still cannot be mounted via NFS, and the following is the latest logU-Boot 2020.04 (Nov 26 2024 - 22:13:08 +0800)CPU: i.MX6ULL rev1.1 792 MHz (running at 396 MHz)CPU: Industrial temperature ...
I also get the same "mounting rootfs" error when I boot from nfs. I'm thinking "rootfs" is something I don't have, and I'd like to not try to mount it. I'm totally not sure. I'm very new at this kernel stuff. SECOND: ...
rootfs $ cd rootfs $ dd if=/dev/zero of=rootfs.img bs=1M count=50 $ mkfs.ext2 -L riscv-rootfs rootfs.img $ sudo mkdir /mnt/rootfs $ sudo mount rootfs.img /mnt/rootfs $ sudo cp -ar ../busybox/_install/* /mnt/rootfs $ sudo mkdir /mnt/rootfs/{dev,home,mnt,proc,sys,tmp,...
mount: mounting /dev/mtdblock23 on /rootfs failed: Invalid argument 1 定位前思考 操作流程如下: Buildroot生成rootfs.squashfs。 通过工具烧录到NAND分区。 在Linux环境下,挂载:mount -t squashfs /dev/mtdblock23 /rootfs。 预想定位流程: strace查看是哪个系统调用返回的Invalid argument。
NFS: MNTPATH: '/home/zenki/nfs/rootfs' NFS: sending MNT request for 192.168.8.1:/home/zenki/nfs/rootfs NFS: failed to create MNT RPC client, status=-101 NFS: unable to mount server 192.168.8.1, error -101 VFS: Unable to mount root fs via NFS, trying floppy. ...
I use the cmd to build a basic rootfs, then decompress and replace the original Linux_for_tegra/rootfs; build linux rt kernel, generate image and flash is also successful, but failed to boot in the initramfs mount file …
No filesystem could mount root, tried: jffs2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) Backtrace: [<c0048b90>] (dump_backtrace+0x0/0x110) from [<c0376580>] (dump_stack+0x18/0x1c) r7:c2c15000 r6:c006dac0 ...
针对你遇到的问题“mount: mounting 192.168.5.11:/home/book/nfs_rootfs on /mnt failed: device or resource busy”,我们可以按照以下步骤进行排查和解决: 确认NFS服务器状态: 确保NFS服务器正在运行,并且共享目录/home/book/nfs_rootfs已经正确配置在NFS服务器的/etc/exports文件中。可以使用以下命令检查NFS服务器...