A process of decorating fabric includes the step of imparting wrinkles to the fabric oblique to the warp and weft directions and heat setting the wrinkles into the fabric. The wrinkle imparting step may include moving the fabric longitudinally and simultaneously moving portions of the fabric from ...
In the British standard (BS4952:1992), five specimens from warp and weft directions each are tested. Two different dimensions of specimen in clamps are required for woven and knitted fabrics respectively: a width of 75 mm for both woven and knit, and a gauge length of 75 mm for knit and...
Using the FASTextension meter, the extension of the fabric is measured in the warp and weft directions at three fixed forces – 5, 20, 100gf/cm (4.9, 19.6, and 98.1N/m). The extension at 98.1N/m is defined as the extensibility. And the extension values at 4.9 and 19.6N/m are mea...
Truing up is the term for squaring the warp and weft of a fabric, so that the weaving is truely squared. While it is not necessary for some projects, I am a die hard truer upper! CHECKED FABRIC Continue readingThe Importance of Truing Up Fabric→ ...
PROBLEM TO BE SOLVED: To prepare a woven fabric having a surface change by weaving a longer yarn than a ground yarn in the warp direction, the weft direction or both the warp and the weft directions, exposing wrinkles or unevennesses in the warp direction, the weft direction or both the ...
Denim –True denim is a twill weave cotton-like fabric made with different colored yarns in the warp and the weft. Due to the twill construction, one color predominates on the fabric surface.Dobby Weave –A decorative weave, characterized by small figures, usually geometric, that are woven ...
Desulfurization Filter Fabric made from mixed polyester monofilaments and multifilaments, also performs excellent in areas of flue gas desulfurization and filtation such as slugge dewtering . Technical Parameter Model Warp filament diamete(mm) Weft filament diameter(mm) Warp density thread/cm Wef...
Desulfurization Filter Fabric made from mixed polyester monofilaments and multifilaments, also performs excellent in areas of flue gas desulfurization and filtation such as slugge dewtering . Technical Parameter Model Warp filament diamete(mm) Weft filament diameter(mm) Warp density th...
There are about 14 and 11 yarn counts per centimeter in the warp and weft directions, respectively. The thickness is 0.6 mm and the surface density is 1050 g/m2. Since the curvature of a large-scale tensile fabric The influence of crack length The tearing damage morphologies for specimens ...
is determined by the sum of the warp and the weft cover factor, corrected by subtracting the overlap cover or the product of warp and weft cover factor. In practice, the cover factor may be calculated using the classic Peirce formula8in which the number of threads per inch is divided by ...