Our exposed-fastener metal roof installation shown at above-left is located in Molde, Norway.Align the metal roof panel to eaves.After installing drip edges and valley flashing, the first panel is fit along one rake, square to the bottom edge of the roof. If the roof is not square, the...
while the fourth wall was almost entirely open with four large openings. The CLT elements in the roof rested on the three CLT walls. They were supported on the fourth wall by a 140 mm × 315 mmglulam beamresting into a pre-cut hole in theCLTend walls and supported by threeaerated...
The ground level of the houses had two windows down to the ground, a patio door, an exterior door, and four interior doors. All these were replaced, including the frames; however, the fittings (pan flashings) were not. All exterior and interior walls on the ground floor must be painted...