There are three types of swap modes supported in MCUboot - scratch, move, and using a status partition. Only swap mode using status partition can be used with PSoC™ 6 MCU devices because of the hardware restriction of the large minimum flash write/erase size. The MCUboot library is desi...
blinky_cm4:This application is designed to run on the CM4 CPU of PSoC® 6 MCU. At present, this is a tiny FreeRTOS application that blinks the LED at different rates based on build-time configurations and built-in capabilities of OTA upgrade. On a successful build, a binary file is ge...
The probability of a successful step is still bounded from above by 3/n. A lasting fallback implies that at any generation from t, all bits at positions {Bt + 1, … , n} have been subjected to mutation at least tmix = n∕2 times and these mutations were independent of the ...
Figure 6. Booting the blinky application in the UPGRADE mode after successful SWAP-based upgrade with response NO In the case of a response of 'Y', confirm that the upgrade image is booted up on the next reset and the UART terminal displays the message as shown inFigure 7. ...
After a successful build, edit the<factory_app_cm4>/scripts/ota_update.jsonfile to modify the value of 'version' to '1.1.0'. The factory app starts blinking the user LED at a 1 second interval on bootup and waits for the user button event to start the OTA upgrade process. Press and...