The example includes two different models that can be run. The first is the Human Activity model that works out-of-the-box and the second is the Baby Crying model that can be configured to run. The project is designed to run one model at a time....
3. Before using this code example, make sure that the board is upgraded to KitProg3. The tool and instructions are available in theFirmware LoaderGitHub repository. If you do not upgrade, you will see an error like "unable to find CMSIS-DAP device" or "KitProg firmware is out of date...
So due to the lack of support for my Scope function gen – and my older signal gen – I ended up hacking together my own scripts to complete the job. My script now deals with about 7 instruments of which 5 are Keysight. But it works, is stable and does not need updating e...
The firmware is located at the root of the repository: R02_3.00.06_FasterRawValuesMOD.bin Dependencies: Install the required Python packages: pip install bleak pandas Usage Clone this repository Run the script with the following command: python ring.py --duration <duration_in_seconds> Notes: ...
The libopencm3 project aims to create an open-source firmware library for various ARM Cortex-M microcontrollers. For more information visithttp://libopencm3.org The examples are meant as starting points for different subsystems on multitude of platforms. If you're just looking to test your buil...
TARGET_PATH is the path of target platform FW_FILE.hcd file is the Bluetooth® Firmware file cloned in step-4 of Using the code example section. Take SSH console of target platform. ssh <TARGET_DEVICE_USER_NAME>@<TARGET_DEVICE_IP_ADDRESS> Add the udev rule in the target host board fo...
3. Before using this code example, make sure that the board is upgraded to KitProg3. The tool and instructions are available in theFirmware LoaderGitHub repository. If you do not upgrade, you will see an error like "unable to find CMSIS-DAP device" or "KitProg firmware is out of date...
.hcdis FW file to download (make sure to validate this firmware file file path) Note 1:Currently, random BD addresses are used for testing.Note 2:The CE supports maximum of 1 paired device. If the user is connecting to a new device, nvramxxx.bin should be deleted on the DUT. ...
3. Before using this code example, make sure that the board is upgraded to KitProg3. The tool and instructions are available in theFirmware LoaderGitHub repository. If you do not upgrade, you will see an error like "unable to find CMSIS-DAP device" or "KitProg firmware is out of date...
Upon every device reset, the firmware checks whether the reset event is caused by the WDT. If a reset event occurred due to the WDT, the LED blinks thrice with an interval ofDELAY_IN_MS. If not, it will blink once with the interval ofDELAY_IN_MS. ...