GigabitEthernet1/0/51 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet, address is 003c.1093.f533 (bia 003c.1093.f533) Description: SW-02 UPlink to SW-01 MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1...
# After the configuration is complete, PCs in VLAN 2 and VLAN 3 can ping each other and access the Internet.Configuration Files RouterA configuration file # sysname RouterA # vlan batch 2 to 3 # interface Ethernet2/0/1 port link-type access port default vlan 2 # interface Ethernet2/0/...
When LACP preemption is enabled, a backup interface's priority is changed to be higher than that of the current active interface. When any of the preceding events occurs, perform the following operations: Shut down the faulty link. Select the backup link with the highest priority among N backu...
If A is enabled and B is enabled, then link status must be reported on both devices as link up. If A is disabled and B is enabled, then A must report link up and B must report link down. If A is enabled and B is disabled, then A must report link down and B must report link...
If the system notices that the carrier detect line of a serial interface is up, but the line protocol is down, it periodically resets the interface in an effort to restart it. Interface resets can also occur when an interface is looped back or shut down. restarts Gives the number of ...
WolShutdownLinkSpeed:WOL & Shutdown Link Speed:"10 Mbps First (0)"- "VirtualBox Host-Only Ethernet Adapter"Availability:"Running or Full Power"Caption:"VirtualBox Host-Only Ethernet Adapter"CoInstallers:"Not Available"Default IP Gateway:"Not Available"DHCP Enabled:"No"DHCP...
A Selected or Unselected member port of an edge aggregate interface is placed in Individual state if the following events occur in sequence: a. The member port goes down and then comes up. b. The LACP timeout timer expires because it has not received LACPDUs. For more information about ...
WolShutdownLinkSpeed:WOL & Shutdown Link Speed:"10 Mbps First (0)"- "VirtualBox Host-Only Ethernet Adapter"Availability:"Running or Full Power"Caption:"VirtualBox Host-Only Ethernet Adapter"CoInstallers:"Not Available"Default IP Gateway:"Not Available"DHCP Enabled:"No"DHCP ...
The system is connected viaethernet(not WiFi). I've tested with Ethernet set with both DHCP and static IP. Description of the issue As soon as the connection is established, the system tears down the eth0 configuration and obviously at that point both "normal" and VPN connectivity are lost...
I shut down wifi, doing only this doesn't solve the problem; the machine still says that the ethernet cable is not connected. Then I go to the "advanced" window and click "renew DHCP lease." It doesn't connect right away, but when I close the advanced window, it will usually ...